MAIN FEATURES:
Quick view the characteristic curve of governor in dynamics. Test pump with the curve of governor.
Map and check the curve of governor (idle , part and full load ). Computer (industrial computer work station)
measure and control. Standard computer and standard ports. Hard disk, Windows XP operating system.
1. Primary motor variable-frequency speed regulation
2. Rotation speed, count, temperature, air pressure,rack travel,15”/ 17” LCD display in monitor
3. Iinspecting of timer advanced angle（optional）
4. Two control system. Computer and instruments. You can select one of them when you operate the test bench.
5. Speed presetting
6. Count and temperature setting
7. VE pump performance inspection
8. Fuel temperature auto-control
9. With internal air supply and vacuum
10.With test bench troubleshooting diagnosis and protection
11.Available for testing fuel injection pump types:I、II、III、P7、BQ、PW、K、M、MW、A、B、BV、P（ZU、ZW、ZM）、EP/VA、EP/VM、VE…F…
12.With storage of 200 types fuel pump testing parameters and can be looked into instantly
|
Dragging power |
5.5/7.5/11/15/18.5kw |
|
Length×width×*height |
2050×960×1750mm |
|
Weight |
800kg-1300kg |
|
Voltage / 3 phase |
380/220V(on request) |
|
Frequency |
50/60hz |
|
Speed range |
0-4000rpm/min |
| Speed preseting range |
0-4000rpm/min |
| Speed control accuracy |
＜±1 rpm |
|
12v External DC supply 12v |
6A |
|
24v External DC supply 24v |
3A |
|
Center distance height |
125mm |
|
ISO driving shaft coupling |
120mm |
|
Measurement points |
12cyl |
|
Graduate tubes capacity |
45/150/260ml |
| Feeding pump |
8 L/min |
|
Oil tank cpacity |
60L |
|
Advanced angle measurement（optional） |
0-180 o |
|
Control rack travel measurement（optional） |
0-30mm |
| Lubrication oil circuit for caterpillar（optional） |
|
|
Low pressure |
0-0.4mpa |
|
High pressure |
0-4 mpa |
|
Air pressure |
-0.03-0.3 mpa |
|
Pump internal pressure |
0-1.6 mpa |
|
Vacuum |
-0.1-0 mpa |
|
Heater power |
2 kw |
|
Fuel temperature regulation range /autocontrol |
30-65 ℃ |
|
Test oil cooling |
Heater exchanger |
|
Color of test bench |
Green /yellow /blue |
MAIN FUNCTIONS:
Checking of the advance device in dynamics.
Measurement of each cylinder's delivery at any speed.
Checking of each cylinder's injection timing with static.
Measurement of rack travel at any speed.
Checking of the LDA.
Checking of the mechanical governor.
Checking of the pneumatic governor.
Checking of the vacuum capacity of governor.
Measurement of the internal pressure of VE pump body.
Measurement of the reflux delivery of VE pump.
Testing of the electro-magnetic valve of VE pump.
Checking of the feed pump.
Checking of the sealing of injection pump body. |
